|
|
|
|
|
|
||
|
|
||
|
|
|
|
|
|
||
|
|
||
|
|
||
|
|
||
 |
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
|
 |
|
|||||
The different profiles of the trapezoidal sheets are obtained from galvanized steel coils, according to UNI-EN 10147 with mechanical characteristics as foressen in the D.M of february 14th 1992 and tolerances as EN 10143. The trapezoidal sheets can also be fournished in aluminium, as pr EN 508-2 with a minimum breaking load of 150 Mpa, in copper with mechanical characteristics and physical state defined by UNI 3310 norm, in stainless steel whose characteristics are fixed by the EU 88-86, UNI 8317, UNI 6900 norms.
On request, the steel and aluminium trapezoidal sheets can be prepainted according pr EN 10169-2 norms. The standard paint coat is of polyester resins, other coatings can be fournished.
- Length +- 5 mm.
- Panel thickness +- 2 mm.
- Thickness of coating according UNI norms
- Self-extinguishing polyurethane, CFC FREE according to UNI 9029 norms. On request can also be fournisched foarms with higher uninflammability-class 02 D.D 26.06.84
They are obtained from profiling of carbon steel coils according to UNI 10147 norm with mechanical characteristics as foressen in the DM of february 14th 1992 and tolerances as EN 10143.The steel supports can also be fournished in aluminium supports can be prepainted according pr EN 10169- 2 norm.
The standard paint coat is of polyester resins.
The panels are equipped with a continuos PVC fixed-in profile to increase the overhall fixing stability and to avoid detachments of the supports from the insulation either during handling themor in the working phase. The trapezoid sheets have been studied to realice roofings, walls and floor slabs.
The possibility of particular working as cambering and drawing permit its use in every kind of building.
The thermocovering and thermowalls are monolithic insulated panels studied and realized by ELCOM SYSTEM S.p.A to offer the best in the light building prefabrication field.
They are widely used to realice roofings, walls, internal partitions and false ceilings. For projects with personal requirements the company produces particular joints and special components with thermic cut perfectly its products.